Here’s how to create your own pollinator garden

black eyed Susans and coneflowers in a garden
Image used with permission by copyright holder

Our pollinators need a break. Consider the monarch butterfly or honey bee, or any of our more than 3,600 lesser-known bee species, hundreds of native butterflies, and hummingbirds. They convert flowers into fruits, grains, nuts, and seeds, including those of more than 150 different North American food crops. But they face mounting pressure due to habitat loss and fragmentation. Pollinator gardening reduces that pressure.

What is a pollinator garden?

A pollinator garden is a safe haven for bees, butterflies, moths, hummingbirds, and other creatures that carry pollen. It might be as simple as a large container garden on a balcony, planted with a variety of pollen and nectar bearing flowers. Or it could encompass many acres, with host plants that support various stages of life, a progression of flowers throughout the year, and a source of water. Typically it’s any convenient backyard space that needs a bit of attention.

Recommended Videos

Most gardeners have enjoyed watching butterflies or hummingbirds as they move methodically through the landscape. By following these tips, creating a dynamic landscape that attracts and supports native pollinators may be easier than you think.

Kathryn Roach / Shutterstock

How to create a new pollinator garden

Analyze the site

Bear in mind that a pollinator garden is an informal space that may not mesh with some landscaping. Choose a location where the aesthetics will flow naturally. Also, avoid sites where insecticides are regularly required.

While virtually any available space can support pollinators, the growing conditions determine which plants will grow there. Measure and sketch the site for planning purposes. Note how much sunlight it receives during the growing season. If it’s sunny, is it baking hot afternoon sun or early sun and afternoon shade? Also note the soil condition and whether the ground is typically moist or high and dry.

A few concerns to watch out for are the prevailing winds and presence of deer, rabbits, and potential damaging wildlife. If the site is very windy, you may need to incorporate a screen planting into the plan for protection. Plan to protect young plants from herbivores with fence, netting, or tree wraps.

Create a plan to support all life stages

A well-planned pollinator garden should include the full range of resources that pollinators need to survive: food, water, shelter, and security. Include a feature such as a bird bath, garden pond, or small fountain in your garden for a consistent supply of water. Limit mowing and trimming in the area, leaving the extra foliage for cover. Hand pull weeds as needed to reduce plant competition.

Although ornamental flowers like zinnias produce some of the resources that pollinators need, use them sparingly. Instead, choose a diverse range of native plants the insects and birds in your area recognize and need. Remember to include host plants for butterfly caterpillars to feed upon. Don’t use plants that have been treated with insecticides.

Use your site sketch and plant list to create a garden plan. Include pathways, water features, and plant positions. Use the following tips to guide plant layout.

  • Pollinators need pollen and nectar throughout the growing season. Include plants with early-, mid-, and late-season flowers.
  • Spread bloomers from each season throughout the garden for constant garden-wide interest.
  • Plant in masses of five to seven of the same plant to make it easier for pollinators to forage. Repeat multiple masses of the same plant through the garden.
  • Garden design principles incorporate variation in height, color, form, and texture. As you decide on which plants to grow, consider how you will organize them into complimentary groupings.
  • Plants that will grow taller should be at the rear or center. Low plants should be nearest the edges.
  • Plan for one plant per square foot to ensure a full garden that will compete well against weeds.

Prepare the garden site

Use an old garden hose and landscape-marking paint to mark the locations and shapes of planting beds. Then remove grass and weeds from the beds before adding a 3-inch layer of compost. Work the compost into the upper 3 inches of native soil with a rototiller or digging fork. Rake the surface smooth and cover the beds with 2 to 3 inches of mulch. Install any water features and hardscaping before planting.

Plant your pollinator plants

Position the plants, still in their containers, on the planting beds according to your plan. Start at the rear or center and work outward. Leave a buffer of 8 to 12 inches between the outer plant pots and the bed border. The buffer will account for foliage growth so that plants do not encroach on the pathway. When all plants are in place, review the layout and make any adjustments before planting.

Pull back the mulch before planting each plant, and recover the roots when finished. Water the bed thoroughly. If the garden is near your property border, consider installing signs that say “Pollinator Habitat: Do Not Spray.”

Maintaining your pollinator garden

A pollinator garden is a habitat that seeks to imitate nature. It’s a low maintenance project, but will require some upkeep to become well established and to eliminate non-pollinator-friendly weeds.

In the initial weeks after planting, water the garden well. Begin with daily watering for the first week, then reduce it to 3 times in the second week. Starting with the third week, and continuing through the first summer, check the garden weekly and water as needed.

You may be tempted to remove spent flowers, but try to avoid doing so. Let the plants reseed themselves in the fall and leave the dried stems in place until spring. They’ll provide winter cover for solitary bees and other non-migratory pollinators. When the new growth emerges in spring, cutback the prior year’s dead stems.

Editors' Recommendations

Topics
Former Digital Trends Contributor
Mark Wolfe is a freelance writer who specializes in garden, landscaping, and home improvement. After two decades in the…
6 incredible types of ivy to spruce up your garden
Ivy that will add character to your outdoor space

 

Ivy can look incredibly elegant climbing up a wall or winding around a fence. You can even grow ivy indoors if you’re careful to keep it under control. Ivy makes a lovely addition to vertical gardens, but it can also grow in containers, be left to climb over fences, or be used to decorate outdoor structures. If you’ve decided that your home or garden could use a touch of ivy, then you’ll need to choose the right ivy for your garden. This guide to the different types of ivy will introduce you to six wonderful versions that will look great in your garden.
English ivy

Read more
Goth style isn’t just a fashion trend – it’s taking over 2024 gardens, too
Let this new trend influence your gardening

Not everyone is sold by the colorful, airy vibes of cottagecore. Should you be someone who shies away from bright flowers and cutesy garden decor, goth gardening is a 2024 trend that might be more up your alley. Gothic and dark academia aesthetics dominated fashion this past autumn and winter, and they're now finding their way into warm-weather gardens, too. If you're less into whimsy and more into the macabre, here's how to set up a goth garden for those haunting Daphne du Maurier and Guillermo del Toro vibes.
What does a goth garden look like?

Goth gardens take inspiration from the chilling, mysterious gardens of Gothic literature. While you might associate literary estates like Manderley and Thornfield Hall with death and dreariness, we promise that goth gardens are very much filled with life. The idea is to channel that creepy atmosphere while still maintaining a tidy and productive landscape.

Read more
What you need to know about deadheading in your garden
Tips and tricks for deadheading your flowers

Flowers are a beautiful, colorful way to decorate your home or yard. Whether you’re growing a garden full of blooms or just a single flower to spruce up a corner of your home, you’ll want your plants to bloom as often and for as long as possible. One technique you may have heard of is deadheading. What is deadheading, though, and how does it work? How do you know if your plants would benefit from it, and how can you deadhead your plants without hurting them? We’ll answer all your questions about deadheading here in this simple guide.
What is deadheading?

Deadheading is the act of removing dead flowers from the plant. This serves a couple of purposes. It improves the aesthetics of plants and the garden overall by getting rid of dead blooms. More importantly, however, it frees up energy for your plant to use. Plants will continue to devote energy to blooms that have died, since this is where seeds or fruit form.

Read more